/*====================================================================

   filename:     DSPCore.h
   project:      GCemu
   created:      2004-6-18
   mail:		  duddie@walla.com

   Copyright (c) 2005 Duddie & Tratax

   This program is free software; you can redistribute it and/or
   modify it under the terms of the GNU General Public License
   as published by the Free Software Foundation; either version 2
   of the License, or (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.

   ====================================================================*/

#ifndef _DSPCORE_H
#define _DSPCORE_H

#include "Thread.h"

#include "DSPBreakpoints.h"
#include "DSPEmitter.h"

#define DSP_IRAM_BYTE_SIZE	0x2000
#define DSP_IRAM_SIZE		0x1000
#define DSP_IRAM_MASK		0x0fff

#define DSP_IROM_BYTE_SIZE	0x2000
#define DSP_IROM_SIZE		0x1000
#define DSP_IROM_MASK		0x0fff

#define DSP_DRAM_BYTE_SIZE	0x2000
#define DSP_DRAM_SIZE		0x1000
#define DSP_DRAM_MASK		0x0fff

#define DSP_COEF_BYTE_SIZE	0x1000
#define DSP_COEF_SIZE		0x800
#define DSP_COEF_MASK		0x7ff

#define DSP_RESET_VECTOR	0x8000

#define DSP_STACK_DEPTH	0x20
#define DSP_STACK_MASK	0x1f

#define DSP_CR_IMEM		2
#define DSP_CR_DMEM		0
#define DSP_CR_TO_CPU	1
#define DSP_CR_FROM_CPU	0


// Register table taken from libasnd
#define DSP_REG_AR0		0x00 // address registers
#define DSP_REG_AR1		0x01
#define DSP_REG_AR2		0x02
#define DSP_REG_AR3		0x03

#define DSP_REG_IX0		0x04 // indexing registers (actually, mostly used as increments)
#define DSP_REG_IX1		0x05
#define DSP_REG_IX2		0x06
#define DSP_REG_IX3		0x07

#define DSP_REG_WR0		0x08 // address wrapping registers. should be initialized to 0xFFFF if not used.
#define DSP_REG_WR1		0x09
#define DSP_REG_WR2		0x0a
#define DSP_REG_WR3		0x0b

#define DSP_REG_ST0		0x0c // stacks.
#define DSP_REG_ST1		0x0d
#define DSP_REG_ST2		0x0e
#define DSP_REG_ST3		0x0f

#define DSP_REG_CR		0x12 // Seems to be the top 8 bits of LRS/SRS.
#define DSP_REG_SR		0x13

#define DSP_REG_PRODL	0x14 // product.
#define DSP_REG_PRODM	0x15
#define DSP_REG_PRODH	0x16
#define DSP_REG_PRODM2	0x17

#define DSP_REG_AXL0	0x18
#define DSP_REG_AXL1	0x19
#define DSP_REG_AXH0	0x1a
#define DSP_REG_AXH1	0x1b

#define DSP_REG_ACC0	0x1c // accumulator (global)
#define DSP_REG_ACC1	0x1d

#define DSP_REG_ACL0	0x1c // Low accumulator
#define DSP_REG_ACL1	0x1d
#define DSP_REG_ACM0	0x1e // Mid accumulator
#define DSP_REG_ACM1	0x1f
#define DSP_REG_ACH0	0x10 // Sign extended 8 bit register 0
#define DSP_REG_ACH1	0x11 // Sign extended 8 bit register 1

// Hardware registers address

#define DSP_COEF_A1_0	0xa0

#define DSP_DSCR		0xc9 // DSP DMA Control Reg
#define DSP_DSPA		0xcd // DSP DMA Address (DSP)
#define DSP_DSBL		0xcb // DSP DMA Block Length
#define DSP_DSMAH		0xce // DSP DMA Address High (External)
#define DSP_DSMAL		0xcf // DSP DMA Address Low (External)

#define DSP_FORMAT		0xd1 // Sample format
#define DSP_ACUNK		0xd2 // Set to 3 on my dumps
#define DSP_ACDATA1		0xd3 // used only by Zelda ucodes
#define DSP_ACSAH		0xd4 // Start of loop
#define DSP_ACSAL		0xd5
#define DSP_ACEAH		0xd6 // End of sample (and loop)
#define DSP_ACEAL		0xd7
#define DSP_ACCAH		0xd8 // Current playback position
#define DSP_ACCAL		0xd9
#define DSP_PRED_SCALE	0xda // ADPCM predictor and scale
#define DSP_YN1			0xdb
#define DSP_YN2			0xdc
#define DSP_ACCELERATOR	0xdd // ADPCM accelerator read. Used by AX.
#define DSP_GAIN		0xde
#define DSP_ACUNK2		0xdf // Set to 0xc on my dumps

#define DSP_AMDM		0xef // ARAM DMA Request Mask 0: DMA with ARAM unmasked 1: masked

#define DSP_DIRQ		0xfb // DSP Irq Rest
#define DSP_DMBH		0xfc // DSP Mailbox H
#define DSP_DMBL		0xfd // DSP Mailbox L
#define DSP_CMBH		0xfe // CPU Mailbox H
#define DSP_CMBL		0xff // CPU Mailbox L

#define DMA_TO_DSP		0
#define DMA_TO_CPU		1

// Stacks
#define DSP_STACK_C		0
#define DSP_STACK_D		1

// cr (Not g_dsp.r[CR]) bits
// See HW/DSP.cpp.
#define CR_EXTERNAL_INT	0x0002
#define CR_HALT			0x0004
#define CR_INIT			0x0400


// SR bits
#define SR_CARRY			0x0001
#define SR_OVERFLOW			0x0002
#define SR_ARITH_ZERO		0x0004
#define SR_SIGN				0x0008
#define SR_OVER_S32			0x0010 // set when there there was mod/tst/cmp on accu and result is over s32
#define SR_TOP2BITS			0x0020 // if the upper (ac?.m/ax?.h) 2 bits are equal
#define SR_LOGIC_ZERO		0x0040
#define SR_OVERFLOW_STICKY	0x0080 // set at the same time as 0x2 (under same conditions) - but not cleared the same
#define SR_100				0x0100 // unknown
#define SR_INT_ENABLE		0x0200 // Not 100% sure but duddie says so. This should replace the hack, if so.
#define SR_400				0x0400 // unknown
#define SR_EXT_INT_ENABLE	0x0800 // Appears in zelda - seems to disable external interupts
#define SR_1000				0x1000 // unknown
#define SR_MUL_MODIFY		0x2000 // 1 = normal. 0 = x2   (M0, M2)
#define SR_40_MODE_BIT		0x4000 // 0 = "16", 1 = "40"  (SET16, SET40)  Controls sign extension when loading mid accums.
#define SR_MUL_UNSIGNED		0x8000 // 0 = normal. 1 = unsigned  (CLR15, SET15) If set, treats operands as unsigned. Tested with mulx only so far.

// This should be the bits affected by CMP. Does not include logic zero.
#define SR_CMP_MASK		0x3f

// exceptions vector
#define EXP_STOVF		1 // 0x0002 stack under/over flow
#define EXP_2			2 // 0x0004
#define EXP_3			3 // 0x0006
#define EXP_4			4 // 0x0008
#define EXP_ACCOV		5 // 0x000a accelerator address overflow
#define EXP_6			6 // 0x000c
#define EXP_INT			7 // 0x000e external int (message from cpu)

// All the state of the DSP should be in this struct. Any DSP state that is not filled on init
// should be moved here.
struct SDSP
{
	u16 r[32];
	u16 pc;
#if PROFILE
	u16 err_pc;
#endif
	
	// This is NOT the same cr as r[DSP_REG_CR].
	// This register is shared with the main emulation, see DSP.cpp
	// The plugin has control over 0x0C07 of this reg.
	// Bits are defined in a struct in DSP.cpp.
	u16 cr;

	u8 reg_stack_ptr[4];
	u8 exceptions;   // pending exceptions

	// DSP hardware stacks. They're mapped to a bunch of registers, such that writes
	// to them push and reads pop.
	// Let's make stack depth 32 for now, which is way more than what's needed.
	// The real DSP has different depths for the different stacks, but it would
	// be strange if any ucode relied on stack overflows since on the DSP, when
	// the stack overflows, you're screwed.
	u16 reg_stack[4][DSP_STACK_DEPTH];

	// For debugging.
	u32 iram_crc;
	u64 step_counter;

	// Mailbox.
	volatile u16 mbox[2][2];

	// Mutex protecting the mailbox.
	Common::CriticalSection g_CriticalSection;

	// Accelerator / DMA / other hardware registers. Not GPRs.
	u16 ifx_regs[256];

	// When state saving, all of the above can just be memcpy'd into the save state.
	// The below needs special handling.
	u16 *iram;
	u16 *dram;
	u16 *irom;
	u16 *coef;

	// This one doesn't really belong here.
	u8  *cpu_ram;
};

extern SDSP g_dsp;
extern DSPBreakpoints dsp_breakpoints;
extern DSPEmitter *jit;

bool DSPCore_Init(const char *irom_filename, const char *coef_filename,
				  bool bUsingJIT);

void DSPCore_Reset();
void DSPCore_Shutdown(); // Frees all allocated memory.

void DSPCore_CheckExternalInterrupt();
void DSPCore_CheckExceptions();

// sets a flag in the pending exception register.
void DSPCore_SetException(u8 level);

void CompileCurrent();

enum DSPCoreState
{
	DSPCORE_RUNNING = 0,
	DSPCORE_STEPPING = 1,
};

int DSPCore_RunCycles(int cycles);

// These are meant to be called from the UI thread.
void DSPCore_SetState(DSPCoreState new_state);
DSPCoreState DSPCore_GetState();

void DSPCore_Step();

#endif // _DSPCORE_H