BS2Emu: Set HID0/1/2/4 and MSR with correct default values

These values were obtained by setting a breakpoint at a game's entry point, and then observing the register values with Dolphin's register widget.

There are other registers that aren't handled by this PR, including CR, XER, SRR0, SRR1, and "Int Mask" (as well as most of the GPRs). They could be added in a later PR if it turns out that their values matter, but probably most of them don't.

This fixes Datel titles booting with the IPL skipped (see https://bugs.dolphin-emu.org/issues/8223), though when booted this way they are currently missing textures. Due to somewhat janky code, Datel overwrites the syscall interrupt handler and then immediately triggers it (with the `sc` instruction) before they restore the correct one. This works on real hardware due to icache, and also works in Dolphin when the IPL runs due to icache, but prior to this change `HID0.ICE` defaulted to 0 so icache was not enabled when the IPL was skipped.

3 files changed, 40 insertions, 5 deletions

diff --git a/Source/Core/Core/Boot/Boot.cpp b/Source/Core/Core/Boot/Boot.cpp
index 4e2844c95b..86ea8e2179 100644
--- a/Source/Core/Core/Boot/Boot.cpp
+++ b/Source/Core/Core/Boot/Boot.cpp
@@ -538,14 +538,12 @@ bool CBoot::BootUp(std::unique_ptr<BootParameters> boot)
       SetDefaultDisc();
 
       SetupMSR();
+      SetupHID(config.bWii);
       SetupBAT(config.bWii);
       CopyDefaultExceptionHandlers();
 
       if (config.bWii)
       {
-        PowerPC::ppcState.spr[SPR_HID0] = 0x0011c464;
-        PowerPC::ppcState.spr[SPR_HID4] = 0x82000000;
-
         // Set a value for the SP. It doesn't matter where this points to,
         // as long as it is a valid location. This value is taken from a homebrew binary.
         PowerPC::ppcState.gpr[1] = 0x8004d4bc;
diff --git a/Source/Core/Core/Boot/Boot.h b/Source/Core/Core/Boot/Boot.h
index 236dddaeca..78748717d0 100644
--- a/Source/Core/Core/Boot/Boot.h
+++ b/Source/Core/Core/Boot/Boot.h
@@ -160,6 +160,7 @@ private:
   static bool BootNANDTitle(u64 title_id);
 
   static void SetupMSR();
+  static void SetupHID(bool is_wii);
   static void SetupBAT(bool is_wii);
   static bool RunApploader(bool is_wii, const DiscIO::VolumeDisc& volume,
                            const std::vector<DiscIO::Riivolution::Patch>& riivolution_patches);
diff --git a/Source/Core/Core/Boot/Boot_BS2Emu.cpp b/Source/Core/Core/Boot/Boot_BS2Emu.cpp
index 1265317a90..2c51a8ddbf 100644
--- a/Source/Core/Core/Boot/Boot_BS2Emu.cpp
+++ b/Source/Core/Core/Boot/Boot_BS2Emu.cpp
@@ -61,10 +61,44 @@ void CBoot::RunFunction(u32 address)
 
 void CBoot::SetupMSR()
 {
-  MSR.FP = 1;
+  // 0x0002032
+  MSR.RI = 1;
   MSR.DR = 1;
   MSR.IR = 1;
-  MSR.EE = 1;
+  MSR.FP = 1;
+}
+
+void CBoot::SetupHID(bool is_wii)
+{
+  // HID0 is 0x0011c464 on GC, 0x0011c664 on Wii
+  HID0.BHT = 1;
+  HID0.BTIC = 1;
+  HID0.DCFA = 1;
+  if (is_wii)
+    HID0.SPD = 1;
+  HID0.DCFI = 1;
+  HID0.DCE = 1;
+  // Note that Datel titles will fail to boot if the instruction cache is not enabled; see
+  // https://bugs.dolphin-emu.org/issues/8223
+  HID0.ICE = 1;
+  HID0.NHR = 1;
+  HID0.DPM = 1;
+
+  // HID1 is initialized in PowerPC.cpp to 0x80000000
+  // HID2 is 0xe0000000
+  HID2.PSE = 1;
+  HID2.WPE = 1;
+  HID2.LSQE = 1;
+
+  // HID4 is 0 on GC and 0x83900000 on Wii
+  if (is_wii)
+  {
+    HID4.L2CFI = 1;
+    HID4.LPE = 1;
+    HID4.ST0 = 1;
+    HID4.SBE = 1;
+    HID4.reserved_3 = 1;
+  }
 }
 
 void CBoot::SetupBAT(bool is_wii)
@@ -214,6 +248,7 @@ bool CBoot::EmulatedBS2_GC(const DiscIO::VolumeDisc& volume,
   INFO_LOG_FMT(BOOT, "Faking GC BS2...");
 
   SetupMSR();
+  SetupHID(/*is_wii*/ false);
   SetupBAT(/*is_wii*/ false);
 
   SetupGCMemory();
@@ -500,6 +535,7 @@ bool CBoot::EmulatedBS2_Wii(const DiscIO::VolumeDisc& volume,
   DVDRead(volume, 0, 0x3180, 4, partition);
 
   SetupMSR();
+  SetupHID(/*is_wii*/ true);
   SetupBAT(/*is_wii*/ true);
 
   Memory::Write_U32(0x4c000064, 0x00000300);  // Write default DSI Handler:   rfi